Skip to main content

GD&T Inspection Public Training

$799

The GD&T Inspection course provides a practical understanding of inspection considerations based on the drawing requirements. With a key emphasis on real-world applications, this course integrates manual inspection methods with digital inspection equipment, such as CMMs. Participants will learn the GD&T inspection mindset - how to simulate part setups, measure parts using metrology equipment, and report inspection results. This is a highly valuable course not only for individuals involved in the inspection process but also for those outside the measurement process who impact the manufacturability of a part.

  • Virtual training through Zoom
  • 4 Half-Day Training Sessions
  • Each day includes 4 hours of training with 30 mins of Q&A -- 12pm-4:30pm EST.
  • Includes 6-months access to the seminar recording after the training is complete.
  • Receive a 10% Discount when registering 3 or more people from the same company.*
  • Bundle GD&T Inspection with any other public seminar event and receive $100 off.*

*In order to receive discounts, please reach out to us for registration.


DISCLOSURE: The GD&T Fundamentals course is a prerequisite for the GD&T Inspection training. Attendees must have previously completed a GD&T Fundamentals course or have GD&T experience/knowledge as defined in the course description prior to registration for the GD&T Inspection course. The GD&T Inspection training will not review basic concepts reviewed in the Fundamentals course.

Full course description can be found in the GD&T Inspection syllabus.

Feedback from Our GD&T Inspection Trainings

Aaron R.

Test Technician I

Kevin R.

Sr. Quality Engineer

Robert S.

QC Inspection / Team Member II

Austin F.

Technical Learning Specialist II

Dennis H.

QC / Technician II

Eric S.

Quality Inspector

Upcoming GD&T Inspection Public Seminars

4-Day GD&T Inspection

  • July 29-Aug. 1, 2024
  • 12:00 pm - 4:30 pm EST
  • Registration ends: July 26, 2024

4-Day GD&T Inspection

  • October 28-31, 2024
  • 12:00 pm - 4:30 pm EST
  • Registration ends: October 25, 2024

How it Works

Registration Confirmed

Once registered, a confirmation email will be sent with additional training information.

Training Materials Sent

A packet of training materials will be sent digitally (by email) two weeks before training – if located in the USA, printed materials will also be sent one week prior to the training date.

Zoom Link Sent

A unique to you Zoom link will be sent two weeks prior to the training date.

Live Training

We will meet for training each day for 4 hours followed by 30 minutes of Q&A.

After Training

A Certificate of Completion will be provided for full attendance, and 1-year access to our our online platform: webinars, bonus videos, and instructor question line.

Course Objectives

By the end of this public seminar, students will be able to:

  • Perform the GD&T inspection process; setup, measure, & report
  • Understand reality of metrology and measurement uncertainty
  • Recognize essential manual tools for inspection
  • Check size dimensions according to standards
  • Learn how to physically setup and simulate part datum features
  • Measure and calculate bonus tolerance based on size and position
  • Apply standardized reporting methods for both CMM and manual results
  • Transition from physical setups to digital setups using CMM

Who this training is for:

Our GD&T Inspection Training provides a comprehensive understanding of inspection considerations based on the engineering requirements. This course focuses on inspection techniques and builds upon the students’ existing fundamental understanding of GD&T concepts. GD&T Inspection is not only for inspectors - it is for anyone involved in the lifecycle of a manufactured part. We highly recommend completion of our GD&T Fundamentals Course, or an equivalent GD&T course, before enrolling in our GD&T Inspection Training.

For a check on your GD&T skills, take this quiz:

Take the Quiz!

What's included:

Virtual Training - Completed via Zoom

Join the training on any device, from anywhere! With our virtual training, you can participate from home, work, or on the go.

Certificate of Completion

You will be provided with a Certificate of Completion for full attendance.

Review Reference Packet

You will receive a digital copy of the handouts that will be used during the training. These will be emailed one week before the training event. If you register with a United States mailing address, you will also receive printed copies of the training materials in the mail no later than the Friday before training.

Real-world Industry Examples

Our lessons utilize real-world drawing examples and have high quality animations, graphics, and videos of metrology equipment and setups to give our students a practical learning experience.

1-Year Access to Online Platform

Access to our live & pre-recorded monthly webinars is included with this training. 1-Year access is also included to our Instructor Question Line for post-training support.

6-Months Access to Seminar Recording

You will receive 6-months of access to the seminar recording after the training is complete.

Pricing and Discounts

Register Today to Secure Your Spot

Learn More About the Course:

Find all the details about the GD&T Inspection Public Training Course by downloading the course syllabus below.

Cancellation Policy

If you need to cancel your registration for any reason, please reach out to us at to receive a full refund or to transfer your registration to a future training date. Cancelation is required at least 48-hours prior to the event.